Русский | English
Системы
Архив новостей
Статьи
Vintage review
Техинфо
Форумы
Ссылки
.


Rambler's Top100

Главная

Joseph Esmilla's MAIN LISTENING ROOM

LP AND 78 RPM PLAYBACK SYSTEM

  • Garrard 301 grease bearing model on a heavy plywood laminate plinth. SME 3012-II tonearm with a Denon DL103R in an Orsonics AV101B headshell. Alternate tone arm [mounted at the back] is a Fidelity Research FR64fx, used mainly with a Grado ZTE + with 78 rpm stylus.
  • Thorens TD124II also on a heavy plywood laminate plinth, Ortofon RMG 309 arm and SPU GME cartridge.
  • Tamura TKS83 for MC step-up, switchable load between 3 ohms and 40 ohms.

MICROPHONES

  • Shure SM81 cardioid condensers in shock mounts on an adjustable angle stereo bar on a K&M microphone boom and stand.

ANALOG TAPE DECKS

DIGITAL SOURCES

FM TUNER

PREAMPS

  • JE Labs deluxe - 2 x 5691 for phono, 2 x 76 linestage and 2 x 6SN7GTB cathode followers. Outboard 5v4 rectified, choke input power supply.
  • Diego Nardi monophono preamp with variable EQ for 78 rpm shellac records.
  • DB systems switchbox for selecting line level sources.

AMPS

  • JEL SE300Bdx monoblocks with Tamura F7002 permalloy OPTs.
  • JEL stereo SE2A3dx with Tango U808 OPTs.
  • JEL stereo SE410/VT25 with Tango FW20-7S OPTs.
  • JEL stereo SE245 with Tamura F475 OPTs.
  • JEL stereo SE171A with Tango H-5S OPTs.

CABLES

  • Mogami shielded microphone cables for low level phono interconnects.

  • Kimber KCAG and PBJ interconnects for line level.

  • Kimber 4TC speaker cables.

SPEAKERS

Two-way horn speakers using Altec components - 414Z in 614 bass reflex cabinets crossed over at 900hz [6db slope] to 811 horn lenses with 802D compression drivers and 3000H super tweeters. Click here for more information.

or

Altec 755As in open baffles. Click here for plans.

Joseph Esmilla

 
Copyright (c) by site Jeen, 2002-10